|
Model
200 Vibratory Driver/Extractor with Model 700 Power Unit
|
- Rifle-bored top plate delivers oil to motors without
using hoses
- Patented one piece helical gear/eccentric eliminates
gearbox failures caused by broken pins, keys, bolts or
splines found in all other vibro gearboxes
- Giant double roller spherical bearings for super long
life
- Center safety pin shows the line load on pile and cranes
|
Advance, profit
generating features that are years ahead of the competition:
- Patented multistage suppressor design reduces vibro
weight and height while increasing line pull by 100%.
- Vibro will not shake the crane line or boom even during
vibro "starting" and "stopping."
- Center safety pin shows pile crew and crane operator
how much line pull is on pile and crane.
- Only vibro on market with detachable suppressor housings
to fit any height and weight requirements.
- One piece helical gear/eccentric eliminates keyways,
pins, splines, and bolts inside the gearbox.
- Heavy metal enhanced eccentric design reduces internal
parts by up to 75% while increasing dynamic force.
- Giant spherical bearings allow for batter operations
without damage and reduce heat for extremely long life.
- Computer designed gearbox is perfectly balanced with
lowest center of gravity on the market.
- Rifle bored top plate eliminates all hoses on suppressor
and to hydraulic motors. Mechanic's dream come true.
- Heavy duty clamp cylinder is machined from one piece
of solid steel to eliminate o-rings and bolt-on guards.
- Power unit comes standard with spare hydraulic tank,
tool kit, dual controls on pendant and control panel.
- Very simple open loop hydraulic system with highest
quality valves with lighted indicators.
- Variable flow in both directions for use on drills,
winches, hydraulic hammers, and other attachments.
- Oversized radiator and hydraulic oil cooler with proven
performance in the heat of Saudi Arabia.
|
|
Eccentric moment
|
5,080 kg-cm (4400 in-lbs)
|
Frequency (variable)
|
0-1800 vpm
|
Driving force @ 1600 vpm (standard)
|
145 metric ton (160 US tons)
|
Driving force @ 1800 vpm (for driving in sand)
|
183 metric ton (202 US tons)
|
Amplitude
|
30 mm (1.17 in)
|
Maximum line pull
|
1,335 kN (150 US tons)
|
Suspended Weight (with universal clamp)
|
6,167 kg (13,600 lbs)
|
Length
|
256 cm (101 in)
|
Width throat
|
35 cm (14 in)
|
Width at widest point
|
43 cm (17 in)
|
Height (with 223 kN (30 ton) (short suppressor & clamp)
|
153 cm (60 in)
|
Height (with 1,335 kN/150 ton)(suppressor & 200 clamp)
|
238 cm (94 in)
|
Hydraulic hose length (standard)
|
46 meters (150 ft)
|
Hydraulic hose weight
|
680 kg (1,500 lbs)
|
|
Updated 8/6/2008
|
Printable Spec Sheet with 700 Power Unit