|
Model
200T Vibratory Driver/Extractor with Model 700 Power Unit with 700
HP
|
- Rifle-bored top plate delivers oil to motors without
using hoses
- Patented one piece helical gear/eccentric eliminates
gearbox failures caused by broken pins, keys, bolts or
splines found in all other vibro gearboxes
- Giant double roller spherical bearings for super long
life
- Center safety pin shows the line load on pile and cranes
|
Advance, profit
generating features that are years ahead of the competition:
- Patented multistage suppressor design reduces vibro
weight and height while increasing line pull by 100%.
- Vibro will not shake the crane line or boom even during
vibro "starting" and "stopping."
- Center safety pin shows pile crew and crane operator
how much line pull is on pile and crane.
- Only vibro on market with detachable suppressor housings
to fit any height and weight requirements.
- One piece helical gear/eccentric eliminates keyways,
pins, splines, and bolts inside the gearbox.
- Heavy metal enhanced eccentric design reduces internal
parts by up to 75% while increasing dynamic force.
- Giant spherical bearings allow for batter operations
without damage and reduce heat for extremely long life.
- Computer designed gearbox is perfectly balanced with
lowest center of gravity on the market.
- Rifle bored top plate eliminates all hoses on suppressor
and to hydraulic motors. Mechanic's dream come true.
- Heavy duty clamp cylinder is machined from one piece
of solid steel to eliminate o-rings and bolt-on guards.
- Power unit comes standard with spare hydraulic tank,
tool kit, dual controls on pendant and control panel.
- Very simple open loop hydraulic system with highest
quality valves with lighted indicators.
- Variable flow in both directions for use on drills,
winches, hydraulic hammers, and other attachments.
- Oversized radiator and hydraulic oil cooler with proven
performance in the heat of Saudi Arabia.
|
|
Eccentric moment
|
6003 kg-cm (5200 in-lbs)
|
Frequency (variable)
|
0-1650 vpm
|
Driving Force @ 1650 vpm
|
1788 kN (201 US tons)
|
Amplitude
|
32 mm (1.28")
|
Maximum line pull
|
1335 kN (150 US tons)
|
Suspended Weight ( with universal clamp)
|
6304 kg (13,900 lbs)
|
Length
|
256 cm (101")
|
Width throat
|
35 cm (14")
|
Width at widest point
|
43 cm (17")
|
Height (with 223 kN (30 ton) short suppressor & clamp)
|
153 cm (60")
|
Height (with 1335 kN ( 150 ton) suppressor & 200 clamp)
|
238 cm (94")
|
Hydraulic hose length (standard)
|
46 meters (150 ft)
|
Hydraulic hose weight
|
680 kg (1500 lbs)
|
|
Power Unit Specifications: (Model 700)
|
|
Engine CAT
|
C18 ACERT Tier III Certified
|
Power (Caterpillar)
|
522 kW (700 hp)
|
Operating speed (No Load)
|
800 to 2,100 rpm
|
Drive pressure (max)
|
344 bar (5,000 psi)
|
Drive flow (variable)
|
0-741 lpm (0-196 gpm)
|
Clamp pressure (max)
|
310 bar (5,000 psi*)
|
Clamp flow
|
41 lpm (10 gpm)
|
Weight
|
9,061 kg (19,975 lbs)
|
Length
|
401 cm (158 in)
|
Width
|
196 cm (77 in)
|
Height
|
259 cm (102 in)
|
Hydraulic reservior
|
2,498 liters (660 gal)
|
Fuel tank
|
662 liters (175 gal)
|
|
(Specs and Data Updated 8/5/2008)
|
Printable Spec Sheet with 700 PowerUnit