|
Model 250VM (Variable Moment)
with Model 700 Power Unit
- Rifle-bored top plate delivers oil to motors without using hoses
- Patented one piece helical gear/eccentric eliminates gearbox failures
- 80% less hoses for easier and less expensive maintenance
- Giant double roller spherical bearings for super long life
- Center safety pin shows the line load on pile and crane
- Over double the line pull of any hammer in its class
- Jaws are cast from ASTM 148 and heat treated for long life.
- Rubber elastomers are specially made to prevent shock to the crane boom. APE's elastomers are the largest in the industry.
|
Eccentric moment (variable)
|
0 to 5,184 kg-cm (4,500 in-lbs)
|
|
Frequency (variable)
|
1,750 cpm (1,950 Optional)
|
|
Driving force @ 1,750 vpm
|
178 metric tons (196 US tons)
|
|
Driving force @ 1,950 vpm
|
220 metric tons (243 US tons)
|
|
Amplitude without attachment
|
0-32 mm (1.25 in)
|
|
Maximum line pull
|
1,335 kN (150 USt)
|
Suspended Weight
(w/ sheet clamp & 23m(75') hose)
|
7,936 kg (17,500 lbs)
|
|
Dynamic weight (w/sheet clamp)
|
4,365 kg (9,625 lbs)
|
|
Length
|
318 cm (125 in)
|
|
Width throat
|
35 cm (14 in)
|
|
Width at widest point
|
43 cm (17 in)
|
|
Height
|
254 cm (100 in)
|
|
Hydraulic hose length (standard)
|
46 meters (150 ft)
|
|
50' of Hydraulic hose weight with oil
|
907 kg (2,000 lbs)
|
|
Power Unit Specifications: (Model 700)
|
|
Engine CAT
|
C18 ACERT Tier III Certified
|
|
Power (Caterpillar)
|
522 kW (700 hp)
|
|
Operating speed (No Load)
|
800 to 2,100 rpm
|
|
Drive pressure (max)
|
344 bar (5,000 psi)
|
|
Drive flow (variable)
|
0-741 lpm (0-196 gpm)
|
|
Clamp pressure (max)
|
310 bar (5,000 psi*)
|
|
Clamp flow
|
41 lpm (10 gpm)
|
|
Weight
|
9,061 kg (19,975 lbs)
|
|
Length
|
401 cm (158 in)
|
|
Width
|
196 cm (77 in)
|
|
Height
|
259 cm (102 in)
|
|
Hydraulic reservior
|
2,498 liters (660 gal)
|
|
Fuel tank
|
662 liters (175 gal)
|
|
(Specs and Data Updated 8/1/2008)
|
Printable Spec Sheet with 700 Power Unit