Model 6 Vibratory Driver/Extractor
with Model 14 Power Unit





(Specs and Data Updated 7/30/2008)

Downloads:
Full Manual PDF Size: 6.99 MB

Printable Blow-up drawings & parts list

Amplitude equation formula in metric
Amplitude equation formula in non-metric
APE Quick Disconnect Info
  • For Driving and extracting plastic sheet piles.
  • Weighs just 660 lbs and can be reduced to 380 lbs.
  • For Driving and extracting plastic sheet piles.
  • Model 6 Vibro driving plastic sheets.
  • The Model 6 is designed to operate off any backhoe.
  • Patented one piece helical gear/eccentric eliminates gearbox failures caused by broken pins, keys, bolts or splines found in all other vibro gearboxes.
  • Perfect for driving and extracting plastic and light weight sheets or piles.
  • High strength clamp ensures maximum grip without damaging sheets.
Advance, profit generating features that are years ahead of the competition:
  • Can mount and operate off backhoe for situations where crane use is not preferable.
  • Center safety pin shows pile crew how much line pull is on pile.
  • Only vibro on market with detachable suppressor housings to fit any height and weight requirements.
  • One piece helical gear/eccentric eliminates keyways, pins, splines, and bolts inside the gearbox.
  • Two eccentric weights deliver 54 kN (6 US Tons) of driving force.
  • The Model 6 can be operated under water. (Consult factory for depth and submersion time limitations).
  • Computer designed gearbox is perfectly balanced with lowest center of gravity on the market.
  • Twice the eccentric moment of our popular Model 3 vibro. All internal parts are interchangeable with Model 3.
  • High strength clamp ensures maximum grip without damaging plastic and light weight sheets and piles.
  • Because of low height, the Model 6 is perfect for usage in tight and covered areas.
  • Small enough to be transported in the back of a pickup
Note: APE can help with hydraulic flow calculations for contractors wishing to mount the vibro directly to the excavator.


Vibro Specifications:  
Eccenteric Moment 70 kg-cm (60 in. lbs.)
Drive Force Max 68 kN (7.67 US Tons)
Frequency (cpm) 0 to 3000 vpm
Amplitude Consult Factory
Pile Clamp Force 214 kN (24 US Tons)
Line Pull for Extraction 44.48 kN (5 US Tons)
Suspended Weight (without suppressor) 100 kg (220 lbs.)
Suspended Weight (with suppressor) 173 kg (660 lbs.)
Length 63 cm (25" )
Width at Throat 15.2 cm (6")
Height with clamp attachment 91.4 cm (36")
Height without clamp attachment 70 cm (27.5")
Weight 780 lbs (353.80 kg)

Power Unit Specifications: (Model 13)
Engine Type Yanmar Two Stroke Diesel
Power (Max) 10 hp (7.46 kW)
Operating Speed (No Load) 400 to 3,600 rpm
Drive Pressure (Max) 2500 psi (172.37 bar)
Drive Flow (Variable) 0-5 gpm (18.925 lpm)
Clamp Pressure (Max) 2500 psi (172.37 bar)
Clamp Flow 0-5 gpm (18.925 lpm)
Weight 640 lbs (113 Kg)
Length 31 in (78.74 cm)
Width 24 in (60.96 cm)
Height 42.5 in (99.06 cm)
Hydraulic Reservoir 20 gal (75.71 liters)
Fuel Tank 1.2 gal (4.54 liters)


















© 2009 American Piledriving Equipment.
If you see any missing or erroneous information, including product specifications,
please notify the IT staff at webmaster@apevibro.com