J&M Top Drive Augers
J&M Top Drive Augers | ||
---|---|---|
J&M Model 760 J&M Model 3060 |
J&M Model 5050 J&M Model 35AT |
J&M Model 100K |
J&M Model 100k Top Drive Auger
Product Documents |
---|
Save PDF (Takes a Few Moments) Operating Manuals and Documents |
Specifications | Standard | Metric | |
---|---|---|---|
Low Speed High Torque |
Torque | 24,400 ft-lbs per 1000 psi | 3,373.42 kgm per 69 bar |
Max Pressure | 4,200 psi | 289.58 bar | |
Rotation Speed | 23 rpm | ||
Max Flow | 196 gpm @ 8.5 gal / rev | 742 lpm @ 32.18 lit / rev | |
Max Horse Power | 500 hp | 372.85 kWr | |
High Speed Low Torque |
Torque | 12,200 ft-lbs per 1000 psi | 1,686.71 kgm per 69 bar |
Max Pressure | 4,200 psi | 289.58 bar | |
Rotation Speed | 46 rpm | ||
Max Flow | 196 gpm @ 4.3 gal / rev | 742 lpm @ 16.28 lit / rev | |
Max Horse Power | 500 hp | 372.85 kW | |
Crowd Force | 80,000 lbs | 36,287.39 kg | |
Suspended Weight | 9,500 lbs | 4,309.13 kg | |
Depth | 62 in | 1,574.8 cm | |
Width (Lead Section) | 37 in | 939.8 cm | |
Shipping Width (Overall) | 79 in | 2,006.6 cm | |
Height | 127 in | 3,225.8 cm | |
ID of Output Shaft | 7.38 in | 187.45 cm | |
ID of Rotary Joint | 3 in | 76.2 cm | |
Adapters | 200 mm Male Hex | ||
Lead Adapters | U-37, ST-150, ST-190 |
HORSEPOWER = | FLOW(gpm) x PRESSURE(psi) |
1714 |
FLOW(gpm) = | HORSEPOWER x 1714 |
PRESSURE(psi) |
PRESSURE(psi) = | HORSEPOWER x 1714 |
FLOW(gpm) |
Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.