APE Model 3
- For driving plastic sheet piles
- weights just 600 lbs (272 kg)
- Small enough to be transported in the back of a pickup
- Can mount and operate off backhoe
|
|
APE Model 6
- For driving and Extracting plastic sheet piles
- Weighs just 660 lbs and can be reduced to 380 lbs.
- Model 6 is perfect for usage in tight and covered areas.
|
|
APE Model 20
- The model 20 is designed to operate off any backhoe
- Uses the same jaws as our larger models
- Perfect for driving and extracting plastic and light weight sheets or piles
|
|
APE Model 33EX
- Low headroom supressor housing.
- Special valves available for clamp
circuit operation from just two hoses
- Giant double roller spherical bearings for super long life.
|
|
APE Model 50
- The APE Model 50 Vibratory Pile Driver/Extractor is the largest, most powerful machine in it's class.
- Motors are recessed out of harm's way for greater protection
- Oversized radiator and hydraulic oil cooler
with proven performance in the heat of Saudi Arabia.
|
|
APE Model 50E (Excavator Mounted)
- As an attachment for excavators for the purpose of driving and extracting sheet piles, soil compaction, asphalt cutting, pipe piles, pin piles, etc.
- Can mount and operate off backhoe for situations where crane use is not preferable.
|
|
APE Model 100
- Lightest 2200 in-lb machine available.
- 50 ton suppressor
- Design to run on 260 Power Unit
- Biodegradeable oil
- Suspended weight includes 1/2 of the hose bundle.
|
|
APE Model 100 Tandem
- Zero Headroom Vibro
- Pile fits in center of two hammers.
- Clamp fits around sides of pile to reduce field splices allow maximum pile length
- Clamp opens just like a pile gate
- Can operate from forklift, backhoe or standard crane
|
|
APE Model 120V Variable Moment
- Variable amplitude for driving in vibration sensitive areas
- Eccentric moment from 0-1600 in-lbs
- Giant double roller spherical bearings for super long life
|
|
APE Model Model 150
- Rifle-bored top plate delivers oil to motors without hoses
- Patented multistage suppressor design reduces vibro weight and height while increasing line pull by 100%.
- Oversized radiator and hydraulic oil cooler with proven performance in the heat of Saudi Arabia.
|
|
APE Model 150T
- "T" for Heavy metal Tungsten insert in the eccentrics.
- Patented one piece helical gear/eccentric eliminates gearbox failures caused by broken pins, keys, bolts or splines found in all other vibro gearboxes.
|
|
Model 170V Variable Moment
- Variable amplitude for driving in vibration sensitive areas
- Eccentric Moment (variable) 0-1950 in-lbs
|
|
APE Model 200
- Only vibro on market with detachable suppressor housings to fit any height and weight requirements.
- Computer designed gearbox is perfectly balanced with lowest center of gravity on the market.
- Center safety pin shows the line load on pile and cranes
|
|
APE Model 200T
- Only vibro on market with detachable suppressor housings to fit any height and weight requirements.
- Computer designed gearbox is perfectly balanced with lowest center of gravity on the market.
- Center safety pin shows the line load on pile and cranes
|
|
Model 200-6
- Rifle bored gearbox with forced oil cooling
system for continous operation @ 100 F
- 5 year warranty on CAT power pack
- Helical gear/eccentric one piece
|
|
Model 200 Tandem
- APE large "zero headrom" Vibro
- Can be quickly reduced in weight and height. Suppressor removes quickly in field.
- No bias weights needed. No bolt on weights that can fall off.
|
|
APE Model 250V (Variable Moment)
- Eccentric Moment (variable) 0 - 4,500 in-lbs (5,184kg-cm)
- Variable amplitude for driving in vibration sensitive areas
- Giant double roller spherical bearings for super long life
|
|
APE Model 300
- First Vibro designed for drilling contractors for serious casing installation work in stiff clay type soil conditions
- Two giant eccentrics totalling 6500 inch pounds of eccentric moment
|
|
APE Model 400 "King Kong"
- No vibro can out drive the KING KONG
- Eccentric moment 13,000 in-lbs (15,000 kg-cm)
- Patented one piece helical gear/eccentrics
|
|
APE Model 400 Tandem
- The Model 400 Tandem is powered by two CAT 3412E 990 HP power units.
- One pendant controls both power units.
- Eccentric moment 26,000 in-lbs (30,000 kg-cm)
|
|
APE Model 600 "Super Kong"
- Largest vibro on the market.
- Eccentric moment 20,000 in-lbs (23,090 kg-cm)
- Specially designed to use APE's patented 90 degree quad clamp system
|
|
APE Quad 400 - link comming soon.
- For Super large diameter Cassions
- Eccentric moment 52,000 in-lbs (60,000 kg-cm)
- APE Quad has driven the largest piles in the world.
|
|
