Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon

Drill Specifications

APE Model 20 Drill


SPECIFICATIONS DATA
Torque at Low Speed 4200 ft-lbs per 1000 psi
Torque at High Speed 2100 ft-lbs per 1000 psi
Motor Displacement (Low Speed Mode) 159 cu.in / rev.
Motor Displacement (High Speed Mode) 317.3 cu.in / rev
Maximum Pressure 6500 psi
Maximum Rotation Speed (High Torque) 100
Maximum Rotation Speed (Low Torque) 120
Speed (High Torque/Low Speed) 53 rpm
Speed (Low Torque/High Speed) 108 rpm
Axial Capacity 10 tons
Radial Capacity 30 tons
Hydraulic Hose Length 30 m (100 ft.)
Suspended Weight 2,575 lbs (1,168 kg)
Length 63.5 cm (25")
Width 53.34 cm (21 inches)
Height 58.42 cm (23 inches)
Inside Diameter of Center Shaft 8.9 cm (3.5 inches)

APE Model 275 Power Unit

SPECIFICATIONS DATA
Engine Caterpillar C7 ACERT Tier III
Power 275 hp (205 kW)
Fuel Consumption @ 2100 rpm 13.8 gal/hr (52.4 liters/hr)
Fuel Consumption @ 1600 rpm 12.5 gal/hr (47.4 liters/hr)
Fuel Capacity 85 gal (323 liters)
Operating Speed 600 to 2,100 rpm
Drive Pressure 4,800 psi (326 bar)
Drive Flow (Variable) 0 to 74 gpm (300 lpm)
Clamp Pressure 4,500 psi (306 bar)
Clamp Flow 6 gpm (28 lpm)
Weight 6,800 lbs (3,084 kg)
Length 102 in (259 cm)
Width 50 in (127 cm)
Height 60 in (152 cm)


Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

APE Partners Alessi Equipment Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW