Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon

Drill Specifications

APE Model 75A Drill


SPECIFICATIONS DATA
Torque at low speed 70,000 ft-lbs
Torque at high speed 35,000 ft-lbs
Speed at high torque 20 rpm
Speed at low torque 40 rpm
Axial capacity 80,000 lbs
Radial capacity 80,000 lbs
Hydraulic hose length 100’ (30 M)
Suspended weight 3,500 lbs (1,587 kg)
Auger Length 25 inches
Auger Width 25 inches
Height with sheave 70 inches
Swivel: King type 3 inch 3000 hour 5000 psi

APE Model 275 Power Unit

SPECIFICATIONS DATA
Engine Caterpillar C7 ACERT Tier III
Power 275 hp (205 kW)
Fuel Consumption @ 2100 rpm 13.8 gal/hr (52.4 liters/hr)
Fuel Consumption @ 1600 rpm 12.5 gal/hr (47.4 liters/hr)
Fuel Capacity 85 gal (323 liters)
Operating Speed 600 to 2,100 rpm
Drive Pressure 4,800 psi (326 bar)
Drive Flow (Variable) 0 to 74 gpm (300 lpm)
Clamp Pressure 4,500 psi (306 bar)
Clamp Flow 6 gpm (28 lpm)
Weight 6,800 lbs (3,084 kg)
Length 102 in (259 cm)
Width 50 in (127 cm)
Height 60 in (152 cm)


Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

APE Partners Alessi Equipment Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW