Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon
APE Partners Foundation Equipment Helmets to Hardhats I Make America APE Holland Tracsa Sitsa

Your First Stop for Piledriving Technology News

Archive for "Aug 2006"

J&M Hydraulic Hammers Make PennDOT Debut

Traditionally, the Pennsylvania Department of Transportation has been very rigid with their pile driving criteria, with 20 blows to the inch standard regardless of the pile type or size.

With half of the bridges on the US Route 219 reconstruction in Bradford, PA designed on Monotubes, which cannot take the stresses of high blowcounts, the contractor enlisted the help of GRL. Together they approached PennDOT with a driving system using WEAP Analysis to show they could achieve the required bearing at less than 20 blows per inch, which would prevent overstressing the Monotubes.

The contractor submitted several J&M hydraulic hammers for approval and PennDOT accepted both the J&M Model 82 that they own, with a 8,200 lb ram rated at 32,800 ft/lbs as well as the J&M Model 70B, with a 7,000lbs ram rated at 21,000 ft/lbs.

APE/J&M supplied 2 rental 70B’s in addition to the contractor owned Model 82. Because the hydraulic hammers have an infinitely adjustable stroke inbetween the minumum and maximum, dynamic testing was used on all hammers to determine the optimal hammer stroke. This testing confirmed that the bearing was achievable at something other than 20 blows per inch, in this case 10 blows per inch, which enabled the contractor to drive the Monotubes without fear of destroying them because at 10 blows per inch, the compressive stresses were comfortably below the yield of the Monotube’s steel.

This is the 1st time a hydraulic hammer has been used on a PennDOT project. We look forward to many more.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

The Mighty APE 9.5

The Mighty APE 9.5 Low Headroom Hydraulic Impact Hammer is the most powerful hammer in its class! Why is that? Because there are no other hammers in its class! With over 43,000ftlbs energy and only nine and a half feet tall the 9.5 hydraulic impact hammer is perfect for low headroom projects! Especially when you load it onto an APE ST75 low over head leader system. Running on a 245 Cat excavator and using the excavators hydraulics eliminates the need for a power unit which makes this package totally mobile! There is no hammer available like an APE low head room hammer which comes in many sizes to fit your most difficult situations. Just ask ACC West Coast and they will tell you the results!

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

Wilder Construction Replaces the Tolt River Bridge.

Don Schroeder with Wilder Construction and crew install the temporary bridge piles in the wet lands outside Carnation, WA. The main foundations will be drilled shafts. The way the crew tackled the batter piles on the work trestle is very creative. Using a swinging set of leads and a simple pin arrangement, the batter piles installed very smoothly.

In addition to the swinging leads, there is a pile monkey and fixed pile gate holding the pile in the leads.

For more information on APE lead systems feel free to contact us here at the main office or one of our satellite locations.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

APE D36 Drives 762 mm steel piles in Turkmenistan

An APE Model D36 drives pipe piles for a new oil platform in the Caspian Sea. The jobsite is in Turkmenistan. APE diesels are ISO 9002 and incorporate new technology not available anywhere else. For more details call APE at 253-872-0141 USA

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

HG Harders & Sons, from Panama City, Florida, Invests in the Best Warranty in the Industry

HG Harders took delivery of their new APE 150T Vibro with the APE 350 Power unit and 150 Sheet / H-pile clamp. HG Harders & Sons perform Marine construction projects throughout the Panhandle region of Western Florida. Owner Capt Holden Harders and Vice President Jay Costello are very good friends and I am very proud they chose the APE 150T/ 350 P.U. for this major purchase. APE Southeast will do everything possible to provide quality service on this new purchase for years to come. I am sure American Piledriving’s-best in the industry-New Equipment Warranty program was a deciding factor. Thank you to all the fine people at HG Harders & Sons for this purchase.

Shown here, is the 150T in action.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

Retaining Wall made by Xie’s Patented Barrel Pile with Model 200 Vibro

Project site: Fujian Province, China

Equipment: APE model 200 vibro

Applications: Underground Retaining Wall for high rise building construction

Technology: Xie’s Patented Barrel Pile Technology

Pile information:

  • O.D. 1500 (59 inches)
  • I.D. 1100 (43 inches)
  • Wall thickness: 200 mm (8 inches)

Length: 16 meter – 17 meter (56 feet)

Number of Piles: 200

Comment: Revolutionary Pile driving technology for soft soil foundations. The pile quality is comparable to driven cylinder piles.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

Karl Pacik of IMECO Takes A Vacation Like Most Europeans

Karl Pacik, shown here enjoying his summer holiday is doing what typical Europeans do in the summertime…go on holiday and tell we Americans to “get along without me for a month”. Well APE managed without Karl for a full month. Karl, get back to work! (you look fantastic on that bike)

Sincerely,

John L. White
President, APE/J&M

Note: Photo was used without permission

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

News Navigation

Search

APE Branches

Latest Posts

  • Dec 09 2015
    Northern Exposure
  • Jul 28 2015
    The “SMACK DOWN” New APE D70-52
  • Feb 07 2015
    Going APE for Iron Dog
  • Jan 27 2015
    APE is Breaking the Mold on Traditional Drill Tools
  • Sep 04 2014
    APE China’s first 400 built in China get’s the job done!

  • APE News Article Calendar

    August 2006
    M T W T F S S
    « Jul   Sep »
     123456
    78910111213
    14151617181920
    21222324252627
    28293031  
  • APE News Article Archives

Update News

APE Partners GSA SmartPay Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW