Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon

Your First Stop for Piledriving Technology News

Archive for "Jan 2007"

APE Caribbean

Brothers David & Tony Cooper owners of Marenco LTD of Barbados W.I. recently purchased a New J&M Model 50 Power unit to run this Sand Dredge. The J&M Model 50 Power unit is used in conjunction with a 6” Sand Pump. When they have completed the Dredge work the J&M Model 50 P.U. will be used to Power their recently purchased J&M Model 218 Pile Crusher.
The Coopers once again have shown me you can build a very functional and profitable piece of equipment using what they have on hand and some old fashioned Caribbean Engineering.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

The APE Model 200-6 invades the Northeast

The powerful APE Model 200-6 Vibratory Driver/Extractor has recently been put to the test with three NJ contractors. J.T. Cleary Inc. of Montvale, NJ employed the 200-6 to drive piles for a mooring pier along the Hackensack River in South Kearny. (A Junttan HHK7a hydraulic impact hammer proved bearing capacity). Creamer Environmental is pictured driving sheet piles along the Passaic River in Harrison. Conti Enterprises is shown driving sheets in Long Branch. Cleary, Creamer, and Conti were all extremely impressed with the performance of the 200-6. With 6600 in/lbs eccentric moment, 240 tons driving force, 1600 cycles per minute, and APE’s patented 2 stage supressor virtually eliminating unwanted crane boom vibration, the APE 200-6 is the best choice for contractors needing a 6600 in/lb machine. The three satisfied APE customers listed above are proof positive, and we thank them for their continued patronage.

For more information call Paul Kuzik of APE/J&M NE at 201-400-8356.

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

Tara Group goes APE……….. again

Tara Group was awarded the “Knotts Island” bridge replacement at the middle of 2006. Owner Charlie Andrews knew it would be a challenging project due to the conditions and location. Another challenge was deciding which pile hammer to choose for the job, it wasn’t a challenge, that was a “no brainer” Charlie said. They went APE for the second time! Tara group purchased a brand new APE D19-42 hammer and a set of leads in the beginning of 2006 and with it’s flawless performance we’d be crazy to consider anything else. Tara group has just purchased a brand new APE D-30 and another set of leads. The Tara Group has just began driving their test piles that are 24″ coated pipe piles, and needless to say it’s been an interesting start. APE / J&M wish Charlie & the Tara Group a safe and productive project. Contact your nearest APE / J&M branch to see how we can help you with current, or upcoming projects…..GO APE!

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

When KING KONG Isn’t Big Enough!!

Dutra Construction of Northern California is a heavy contender in the piledriving industry. They know what it takes to get a job done even when the going gets tough. Tough like the Port of Oakland Merritt Sands can be tough, and you know how it goes: “When the going gets tough, the tough get going”! And that is exactly what Dutra Construction did! They got going to APE to come up with a solution to the Port of Oakland Merritt Sand.
Todd Bruce of Dutra Construction came to APE with a special request to drive sheets using a 55’ long, heavy duty follower, to drive the sheets up against the existing dock with very little room and strict tolerances. Todd wanted to do the job right and used his knowledge of past Port Projects. With APE in Dutra’s corner Todd and the Dutra Group knew the project would be successful.
After careful consideration the Vibro of choice was the APE model 600B Vibro, because when King Kong just isn’t big enough “Super Kong” sets the new standard. Dutra Fab, out of RioVista California fabricated the heavy duty follower that bolts to the bottom of the 600B vibro and turns the sheet clamp 90 degrees to enable the driving of the sheets in series of steps that keeps the wall straight.
This is a hard enough job in it’s self, but add a water depth of 45 feet deep and you have a situation when you can’t even see the tops of the sheet pile. A special pile guide was fabricated to the bottom of the clamp that enables it to slip over the interlocks so the jaws can clamp evenly on the sheets even with out having to see the tops of the sheet pile.
Driving sheet pile in the Port of Oakland is tough enough, but when you add a 55’ long follower to the bottom of the Super Kong weighing in at 34,000lbs and backed up by the powerful APE model 1000 Power Unit charging ahead with 1000hp, you get one heck of a driving gorilla with enough driving force and energy to get the job done and Dutra is here to show us how. King Kong is one hard hitting vibro, but in a case like the “Tough Oakland Merritt Sands” it takes King Kong’s big brother, “SUPER KONG”, for the finishing touch!

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

APE Supports Education

When Local 1026 has a Piledriving School, they call on Frank D’Angelo to get things moving.
When Frank needs dependable equipment backed by reliable service, he calls on A.P.E.
American Piledriving Equipment believes it is very important to take part in the education and training of young Pilebucks. By this investment, we help to insure qulified, well trained personnel continue the Pilebuck trade.
A.P.E. is proud to be the choice of both young and old (i mean “experienced”) Pilebucks everywhere!

Share and Enjoy:
  • Facebook
  • Twitter
  • Google Buzz
  • Yahoo! Buzz
  • MySpace
  • Digg
  • StumbleUpon
  • del.icio.us
  • Add to favorites
  • Print
  • email
  • RSS

News Navigation

Search

APE Branches

Latest Posts

  • Dec 09 2015
    Northern Exposure
  • Jul 28 2015
    The “SMACK DOWN” New APE D70-52
  • Feb 07 2015
    Going APE for Iron Dog
  • Jan 27 2015
    APE is Breaking the Mold on Traditional Drill Tools
  • Sep 04 2014
    APE China’s first 400 built in China get’s the job done!

  • APE News Article Calendar

    January 2007
    M T W T F S S
    « Dec   Feb »
    1234567
    891011121314
    15161718192021
    22232425262728
    293031  
  • APE News Article Archives

Update News

APE Partners GSA SmartPay Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW