Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon

Vibratory Driver / Extractor Specifications



APE Model 100 Tandem Vibratory Driver/Extractor


SPECIFICATIONS DATA
Eccentric Moment 50 kgm / 4,400 in-lbs
Frequency (variable) 400-1670 vpm
Driving Force 1423 kN / 160 US tons
Amplitude (free hanging with sheet clamp) 25.4 cm / 1 inch
Maximum line pull 1,068 kN / 120 US tons
Suspended Weight (with universal clamp) 7,258 kg / 16,000 lbs
Vibrating weight (with no clamp) 2,903 kg / 6,400 lbs
Weight of standard clamp 1,588 kg / 3,500 lbs
Length 213 cm / 84 in
Width throat- standard 41 cm / 16 in
Width at widest point 152 cm / 60 in
Height with clamp 239 cm / 94 in
Hydraulic Hose Length (standard) 31 m / 100 ft

APE Model 350 Power Unit

SPECIFICATIONS DATA
Power Unit Engine Caterpilllar C9 Tier III
Maximum power 375 hp (280 kW)
Operating Speed: 800 to 2,100 rpm
Maximum drive pressure 5,000 psi (340 bar)
Maximum hyd. flow - forward 120 gpm (454 lpm)*
Maximum hyd. flow - reverse 120 gpm (454 lpm)*
Clamp pressure 5,000 psi (340 bar)
Clamp pump flow @ 2200 rpm 10 gpm (41 lpm)
Weight 12,300 lbs (5579.2 kg)
Length 126 in (320 cm)
Width 64 in (163 cm)
Height 67 in (170 cm)
Fuel Capacity 121.6 gal (460 L)
Hydraulic Tank (main) 260.0 gal (982 L)
Hydraulic Tank (reserve) 37.5 gal (142 L)





Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

APE Partners GSA SmartPay Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW