American Piledriving Equipment Inc.

Quick Links

Vibratory Driver / Extractor Specifications

3 | 6 | 15 | 20 | 50 | 100 | 150 | 200 | 200-6 | 300 | 400 | 417 | 4400 | 600 | 100 Tandem | 200 Tandem | 400 Tandem | 120VM | 170VM | 250VM
150 Low Headroom | 150T | 200T | 200-6T | 200-6T2 | 200-6T3 | 15E | 20E | 50E | 100E | 33X | 64X

APE Model 400 Vibratory Driver/Extractor

PRODUCT DOCUMENTS

Print Specifications Sheet
Operating Manuals and Documents

SPECIFICATIONS	DATA
Eccentric moment	13,000 in-lbs (149.78 kgm)
Frequency (variable)	400-1400 vpm
Driving Force	3203 kN / 360 US tons
Amplitude with dual clamps	(dynamic wt: 16,000 lbs.) 40 mm / 1.63 in
Amplitude with Quad Clamps	(dynamic wt: 27,000 lbs.) 32mm / .962 in
Maximum line pull	2,224 kN / 250 US tons
Suspended Weight	(with 17' beam and clamps) 22,226 kg / 49,000 lbs
Suspended Weight	(w/Quad Clamp System & hoses) 27,669 kg / 61,000 lbs
Suspended Weight	(w/sheet clamp & hoses) 17,690 kg / 39,000 lbs
Length	305 cm / 120 in
Width throat	66 cm / 26 in
Width at widest point	66 cm / 26 in
Height with 8' beam and clamps	244 cm / 96 in
Height with Quad Clamp System	280 cm / 110 in
Hydraulic Hose Length (standard)	45 m / 150 ft

APE Model 1050 Power Unit

SPECIFICATIONS	DATA
Power Unit Engine	Caterpillar E-series C27 ACERT
Maximum Power	1050 hp (745kW)
Operating Speed	800 to 2100 rpm
Maximum Drive Pressure	5,000 psi (340 bar)
Drive Flow	0 to 321 gpm (1,219 lpm)
Clamp Pressure	4,800 psi (326 bar)
Clamp Pump Flow @ 2200 rpm	6.5 gpm (27 lpm)
Weight	27,000 lbs (12,247 kg)
Length	169 in (442 cm)
Width	82 in (208 cm)
Height	96 in (244 cm)

Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

About Us

Education

Employees

Tools

Quick Links

Vibratory Driver / Extractor Specifications

APE Model 400 Vibratory Driver/Extractor

APE Model 1050 Power Unit